Last updated:
Answers to the questions buyers ask most about feed pellet machines, production lines, prices, shipping and after-sales support. Contact: goldengainsales@163.com | WhatsApp +86 19339934020
A. Choosing a Machine and Capacity
How do I choose the right feed pellet machine for my farm?
Choose by three things: (1) how many kilograms of feed you need per hour, (2) which raw materials you will press, and (3) what power you have, electricity or diesel. Small farms usually start with the KL-125, KL-150, KL-160 or KL-180 at 50–200 kg/h on 220 V or 380 V power. Commercial feed mills use the KL-210, KL-260, KL-300, KL-400 or KL-500 at 300–3,000 kg/h on 380 V. Send us your capacity, raw material and local voltage, and we will recommend a model within 24 hours.
Flat die or ring die pellet machine: which one should I buy?
A flat die machine costs less, is simpler to run and suits small farms or intermittent use. A ring die machine runs continuously at higher output and suits feed mills and commercial farms. Tell us your target capacity and raw material, and we will recommend the right type and model for your project.
How many kg per hour does my pellet machine need to make?
Divide your daily feed need by the hours you will run the machine. Daily feed = number of animals × feed per animal per day. For example, if your animals eat 150 kg of feed a day and you run the machine 3 hours a day, you need at least 50 kg/h; choose one size larger so the machine does not run at its limit. Our models:
| Model | Output (kg/h) | Motor |
|---|---|---|
| KL-125 | 50–100 | 3–4.5 kW (220/380 V) |
| KL-150 | 80–120 | 3–4.5 kW (220/380 V) |
| KL-160 | 120–200 | 4.5–5.5 kW (220/380 V) |
| KL-180 | 150–200 | 5.5 kW (220/380 V) |
| KL-210 | 300–350 | 7.5 or 11 kW (380 V) |
| KL-260 | 500–600 | 15 kW (380 V) |
| KL-300 | 800–1,000 | 22 kW (380 V) |
| KL-400 | 1,000–2,000 | 37 kW (380 V) |
| KL-500 | 2,000–3,000 | 55 kW (380 V) |
What pellet size (die hole) do I need for chickens, cattle, rabbits and fish?
Typical die hole sizes are 3–4 mm for rabbits, chickens, ducks and pigs, 4–6 mm for cattle and sheep, and 2.5–3 mm for sinking fish feed. Holes that are too small can clog with fibrous material, and holes that are too large reduce pellet stability. We supply 1 free die with each machine, and extra dies on request (2.5, 3, 4, 5, 6 and 8 mm).
B. Price and Quotation
How much does a feed pellet machine cost?
Price depends on capacity, die and roller material, motor and power source. GoldenGain flat die pellet machines start from USD 200 and ring die machines from USD 2,000. For a complete production line, send us your raw material, capacity and budget, and we will quote a layout and price.
What information do you need to give me an accurate quote?
To quote accurately we need six things: (1) your raw materials and the animals you feed, (2) the hourly capacity you want, (3) the pellet diameter, (4) your power source (voltage and phase, or diesel), (5) your destination port, and (6) the quantity. Tell us if you also need a hammer mill, mixer or cooler. We reply with a model recommendation, price and delivery time within 24 hours.
Can I buy just one machine, and can I see it working before I pay?
Yes, you can order a single machine. The minimum order is 1 set. Before paying you can ask for a test video with your own raw material, or visit our factory in Zhengzhou, China to see the machine run. Every machine ships with 1 set of spare parts so you can keep producing while waiting for more.
C. Raw Materials and Formulas
What raw materials can a feed pellet machine process?
A feed pellet machine presses ground grains (maize, wheat, sorghum), oilseed meals (soybean, cottonseed, groundnut cake), bran, and dried forage such as alfalfa or straw, usually mixed to a feed formula. Materials must be ground first; fibrous forage needs a hammer mill. Different materials need different die specifications, so send us your formula and we will confirm the right die.
What moisture should my raw material have before pelleting?
For most feed pellet machines, ground raw material should feel slightly damp but not wet, around 8–15% moisture. Try the squeeze test: a handful should hold its shape when pressed and break apart when poked. Too dry and pellets turn loose and powdery; too wet and the die blocks or pellets mould in storage. Dry wet material in the sun or a dryer first.
Can your machine make floating fish feed?
Yes. Our floating fish feed extruder is designed to produce expanded fish feed pellets for aquaculture applications.
Unlike a conventional feed pellet mill, the extrusion machine uses controlled heat, pressure, moisture and mechanical shear to process prepared feed ingredients. During extrusion, starch gelatinizes and the feed expands as it exits the die, creating a porous structure that can reduce pellet density and allow the pellets to float on water.
Common ingredients include corn meal, wheat flour, soybean meal, fish meal and other suitable feed materials. The floating performance depends on the feed formulation, starch content and type, moisture level, extrusion conditions and pellet size. There is no single starch percentage that guarantees floating pellets.
Different pellet diameters and production capacities can be selected according to the machine model and configuration. Proper drying and cooling after extrusion are also important for finished feed quality and storage.
Please tell us your fish species, raw materials, required pellet diameter, target capacity (kg/h) and local voltage. We will help you select a suitable floating fish feed extruder for your production needs.
D. Operation and Pellet Quality
Why are my pellets loose, crumbly or full of powder?
Loose or powdery pellets usually have one of four causes: wrong moisture, raw material ground too coarsely, a die compression ratio too low for your formula, or a worn die and rollers. Fibre longer than one-third of the pellet diameter also makes pellets crack. Check moisture first, regrind finer, then adjust the roller gap or change the die. Let pellets cool before bagging, because hot pellets break easily.
What power does the machine need: electricity or diesel?
Small models run on single-phase 220 V household power; larger models need three-phase 380 V industrial power. For farms with unstable electricity we also offer diesel engine versions: our KL-160 runs on an 8 hp diesel engine. Please tell us your local voltage and frequency, for example 220 V/50 Hz, 220 V/60 Hz, 110 V/60 Hz or 380 V/50–60 Hz, so we can match the motor before shipping.
How long do the die and rollers last, and how do I maintain the machine?
Die and roller life depends on raw-material hardness, moisture and impurities, so it varies from job to job. To extend it: follow the break-in procedure in the manual when the die is new, remove stones and metal before feeding, lubricate the bearings regularly, clean the die after each shift and check the roller gap. We supply spare dies and rollers at any time.
E. Spare Parts and After-Sales
Which spare parts wear out first, and can I buy them from you?
The parts that wear first are the die, the rollers (or roller shell), the cutter blade and the bearings. Every machine ships with 1 set of spare parts, and we can dispatch replacement dies and rollers within 3 days; air delivery usually takes about 10 days. Send us your machine model and photos of the worn part, and we will confirm the exact spare.
What warranty and after-sales support do you give?
All GoldenGain machines come with a 12-month warranty on the main body, counted from the date the machine ships. We provide an operation manual, installation video and online support by WhatsApp or email, and can send an engineer for installation and training on request. Wear parts such as dies and rollers are not covered by the warranty. Contact us at goldengainsales@163.com or WhatsApp +86 19339934020.
F. Ordering, Payment and Shipping
What payment terms do you accept, and how can I pay safely?
We accept T/T bank transfer, L/C at sight and Alibaba Trade Assurance. A common term is a 30% deposit and 70% balance before shipment, after you have checked photos or video of the finished machine. You can pay through Alibaba Trade Assurance to protect your order, and we provide a commercial invoice, packing list and bill of lading for customs.
How long do production and shipping take to Africa, South America and Southeast Asia?
We keep a stock of 500 units of standard models. For customized models, the lead time is within 2 weeks for orders up to 200 units. Sea freight from Qingdao Port to Mombasa, Lagos, Santos or Jakarta takes approximately 30–50 days, depending on whether the vessel is direct or transshipment. Spare parts sent by air take about 10 days. Equipment is packed in wooden cases. We handle all export documentation and can quote FOB, CIF or door-to-door.
Do you also supply a complete feed production line, not just the pellet machine?
Yes. Besides single pellet machines, we supply complete feed lines: hammer mill, mixer, pellet machine, cooler and packing machine, sized from 300 kg/h to 10 tons per hour. We design the layout from your raw materials, capacity and budget, and can supply installation guidance. Start with a single machine now and add the other units later as your volume grows.